Compact Desktop Carbon Coater (DCR) for SEM/TEM Sample Preparation
Vac Techniche DESKTOP COATERS
Compact Desktop Carbon Coater
Showing all 9 results
DCT Turbo Desktop Carbon Coater for SEM/TEM Sample Prep
DESKTOP CARBON COATERS
SEM/TEM Preparation Carbon Coater, Low and high vacuum systems
Desktop Sputter Coater with Carbon Coater (DSCR) for SEM/TEM
Vac Techniche DESKTOP COATERS
Desktop SEM/TEM Sputter and Carbon Coater DSCR
Desktop Turbo Sputter Carbon coating (DSCT) system for SEM/TEM
Vac Techniche DESKTOP COATERS
Desktop SEM/TEM Turbo Pumped Sputter and Carbon Coater DSCT
Desktop Turbo-Pumped Sputter Coater (DST1-170 ) by Vac Techniche
DESKTOP COATERS
Vac Techniche DST1-170 Turbo-Pumped Sputter Coater
DSR1 Desktop Sputter Coater for SEM/TEM sample preparation
Vac Techniche DESKTOP COATERS
DSR1 Desktop SEM/TEM Sputter coater
Sample preparation using sputter coating is the recognised method for non-conductive and low conductive specimens or samples.
Vac Techniche DSR1 has been developed to exceed the requirements for SEM/TEM sample preparation.
The compact and easy to use sputter coater, has the option of using existing pumps or supplied with a pump.
For external pumping the on board computer controls the pump or pumping rig.
Larger samples can be accommodated with our increase vacuum chamber DSR-L and DST-L system
DST1,2,3-300 Desktop Turbo-Pumped Sputter Coater by Vac Techniche
DESKTOP COATERS
Vac Techniche DST1-300 Turbo-Pumped Sputter Coater
With one of the smallest benchtop footprints, DST1-300 provide DC and RF sputtering for high resolution SEM and TEM sample preparation.
The DST1-300 range provides the following versions to satisfy most laboratory applications.
- DST1-300 Single magnetron, DC, RF, sample Bias, sample heating, Sample rotation
- DST2-A Two magnetrons angled central focal point, DC, RF sample Bias, sample heating, Sample rotation.
- DST2-TA Two magnetrons angled central focal point, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation facility for carbon, wire or boat.
- DST2-S Two magnetrons straight, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation facility for carbon, wire or boat.
- DST2-TS Two magnetrons straight, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation facility for carbon, wire or boat.
- DST3-A Three magnetrons angled central focal point, DC, RF sample Bias, sample heating, Sample rotation.
- DST3-TA Three magnetrons angled central focal point, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation facility for carbon, wire or boat.
- DST3-S Three magnetrons straight, DC, RF sample Bias, sample heating, Sample rotation.
- DST3-TS Three magnetrons straight, DC, RF sample Bias, sample heating, Sample rotation, single thermal evaporation for carbon, wire or boat.
4″ magnetron option is also available.
PLD: Compact Desktop Thin Film PLD System with Thermal Evaporation
£0.00DESKTOP COATERS
PLD: Compact Desktop Thin Film PLD
Pulsed Laser Deposition technique leads to efficient, none-thermal ablation and preserves the stoichiometry of the target materials. By applying this method it could deposit materials such as nitrides, oxides, super lattices, polymers, composites.
PLD is equipped with a multi-target manipulator which includes three 2 cm diameter. Targets are in standard size. All of our target manipulators are motorized and includes target rotation
PLD-T: Compact Desktop Thin Film PLD with 3 Evaporation sources
PLD – T is a high vacuum thin film deposition system enables to deposit different materials by both Pulsed Laser Deposition and so thermal evaporation technique.
It can deposit complex materials and crystalline structures onto substrates with very little setup involved.
PLD – T is equipped with a multi-target manipulator which includes three 2 cm diameter.
Targets are in standard size. All of our target manipulators are motorized and includes target rotation
Thermal evaporation sources (Boat / Basket / Coil)
The PLD – T is fitted with three independent heat resistance thermal evaporation sources. Design of the evaporation source holder avoids cross contamination from sources materials to other materials.
The length of source holders can be adjusted in the range of 5~10 cm which meets the costumer requirement.
Vac Coat DTT is also available for evaporation deposition system designed for commercial and research use.
Triple Thermal Evaporation Desktop Coating System
EVAPORATION COATERS
Triple Thermal Evaporation Desktop Coating System
The Vac Techniche triple thermal source desktop coater provides a very versatile thermal evaporation system for a vast range of source materials in various forms from wire, cord, pellets and powders, compatible with Boat/basket and coil source holders.
For ease of use, the touch 7″ colour screen control with fully automatic control, data input, and display is designed for easy use for experienced and inexperienced operators.
The control system allows upto 300 historical processed to be recorded.
Three independent heat resistance thermal evaporation sources.
Evaporation source holder designed causes no contamination from source materials on each other.
The length of the source holders can be adjusted in the range of 50mm~90mm.
Co-Evaporation upgrade available
Evaporation sources
-
- boat
- basket
- coil/wire
Vacuum System consists of:
Heat resistance, Cylindrical Pyrex with 300 mm OD and 200 mm H.
90 L/s turbomolecular pump fitted directly to tge vacuum envelop base plate and backed by a Vac Coat 4m3/h two-stage rotary pump which introduces clean vacuum without the oil contamination that is normally present with an ordinary diffusion pump
Dry backing pump option is also available
The DTT triple evaporation source selection is ideal for deposition of multilayers or alloys.
The DTT, with integral turbo pumping reaches pressure quickly allowing the coating process to commence in a matter of minutes. It is ideal for research, laboratory and product applications