- Biology, bone and Epidermis porosity replication
- Material Science research. Also, it is useful in the manufacture of
- Composite nanofibers.
- Ceramic nanofibers.
Laboratory Equipment Worldwide
Electrospinning is an established method of producing nano- and micro-fibres from a wide variety of natural and synthetic polymers is knows as Electrospinning
The method used to produce these fibres is as follows:
By introducing a polymer solution at a constant flow rate though a small restriction such as a syringe needle.
A high voltage, typically 10 to 30 kV is connected to the needle; it is the applied voltage that induces a charge on the surface of the liquid droplet, when a critical charge is reached, the physical shape of the droplet surface changes, the hemispherical surface of the fluid elongates and a Taylor cone forms.
By applying a greater voltage the now charged droplet , the charged liquid jet is ejected from the Taylor cone and attracted to the earthed collector, which is positioned at a fixed distance from the needle. During this process the solvent evaporates from the polymer solution, leaving dry polymer fibres on the collector.
Our lab scale electrospinning machine has the ability to prepare polymeric/ceramic nanofibers with diameter range of 50 nm to a few microns. Electroris® electrospinning setup mainly consists of main body including syringe pump, spinneret, collector system and high voltage power supply. Two different types of Electroris are available:
In side by side Dual pump Electrospinning system, there are two syringe pumps on both sides of the rotating collector drum;
Production rates will be twice that of the standard model,
Main advantage of this model.
With this flexibility in design, our equipment is especially suitable in:
Our device controls the electrospinning parameters including injection rate of polymeric solution, electrospinning distance, rotating speed of collector drum, working temperature (room temperature to 45°C) and working time. Electroris® supplies sufficient safety scheme for users with respect to the handling of a high voltage power supply and chemical solvents.
Operations Software (Optional): Electrospinning parameters can be programmed in full controllable ways by user-friendly software via USB port.
Power requirements: 200-240 V AC, 50/60Hz, single-phase, 5A
Heating system: room temperature to 45°C
Bright Display and Easy-To-Use Interface
Large four-line 20 character LCD display with 20 membrane keys makes this an attractive, powerful and easy-to-use system.
Operational key for each line of LCD allows easy access to sub-systems of Electroris.
In dual pump systems large graphical LCD along with 20 membrane keys have been used.
The system remembers its last configuration settings.
|Exhaust Fan: Exhaust Fan at the back Operating with on/off timer.
Earth detector: Turn off HV while locking of proper earth
Safety switches: Safety switches in 3 doors.
System Check: Turn the HV off when needed (for example: Injection completed)
For enquiries about the industrial sized Electrospinner unit, please call 01424 834034 or email email@example.com.